Published on : 2017-05-04 03:04:28

If you don t know the state of the box switch it on see what happens see if there already has been a channel scan done before-meaning there are channels on it working or not. The box won t boot to standby and is stuck in pre standby, either after about 3 or 4 moving green lines the box sticks with the green line not moving at all or it keeps moving forever. Updating [email protected] sv 1/2/3 connect your box and pc with a null modem cable and switch on the cable box and put it on standby. All [email protected]/loader can be found in the link at the end of my post marked eamo s library. Locate your usb adapter (port *) right click on that port and select properties. Click the + sign next to ports (com & lpt) 7. Use the drop down to select another port (eg 1, 2 or 3). 07 for theboxsuperusb found in the b0x supr usb [email protected] folder here. [email protected] 2 - the b0x you will need the you will need version [email protected] 3 - the b0x sup3r you will need version gtrom_super_8. Or is it just the one bin file that i install or do i do both. Another method you can use to recover from a bad flash, eg. Just highlight usb with the remote then you will see the (box super usb bin file) appear on the screen. Please can u help anyone please please   bar12 said: can you help me i am trying to put software for starview 1. At the bottom of that tab will be a drop down box with the port selected (port * in your case). Instructions sv4 supr usb to load the files just drag them on to a memory stick and then put the memory stick in the usb port at the back of the receiver.

Thnaks in advance   sorry sorry, dont mean to trouble u guys but i have a replaylite which i flash no probs now but this is my 1st attempt at my sons starview (oh no i,m in trouble lol), i have done both updates cryptstar-v1. I,m assuming both as i downloaded 2 files but there is nothing to say i do both. Run the gtrom loader by pressing download and you will see the % progress increase then download completed message on your pc. Updating [email protected] connect your box and pc with a null modem cable and switch on the cable box and put it on standby. Open gtrom loader software make sure that you set the correct com port that matches the one that is being used make sure b1n file & browse to the [email protected] where you downloaded it to on your pc. Then press the menu button on the remote there you will see usb at the bottom of the screen. (if it doesn t work 1st time try also waiting a couple of sec. You won t see the % on the starview though. This also applies to flashing (up & downloading) the channel data file.   you will need version you will need version you will need version 7. If the box will not re-flash as normal from on or standby, try this but it may take a few goes to work. Re download the firmware just in case you had a corrupted file then try again. The usb converter will be permanently assigned to the port you selected. Make sure you wait until all is finished and you see the download complete pop up message in gtrom. You will have lost any channel data previously on the box & will need to rescan & switch on emu and set the box up from scratch.

Downloaded right files but it keeps telling me serial port can t open have it at com1 but no good. Connect the box to the pc with your cable but switch it off at the back starview box not updating. 01_beta with the remote and press the ok button then you will see the file start loading in to the dating in helmsdale sutherland.
. Once that is complete, do that again but with the theboxsuperusb_bg_logo_080904 file. • now exit 3 times and go to s*y sports and let it update starview box not updating. Load the correct firmware bin file into gtrom & set it to the correct com port, and select app file only then hit download. If you do flash from the moving green line state at boot, you will see the % increase on the gtrom loader software but not on the starvi*w. You may want to wait to see if it goes into standby or switches on eventually or re-flash from this state though it may not work. Go back to your map software program that you use to transfer data and make sure it is looking at the correct port. To switch on after pressing download in the loader. Toward the end of the flash you ll see a flash burning message in gtrom. Please help me or my son aint gonna be impressed lol. The starvi*w will then reboot disconnect from pc and connect back up to the tv click to expand. .Access table checking if still updating.

Appropriate behaviour for young couples dating.

Free chat sex webcam girle live iran.
starview box not updating

(voters: 5382)
  • sex chat with microphone
  • justin guarini dating
  • dating sim 2 rom
  • toronto based dating site
  • hotchatdirect chat profile
  • free femdom chat guest login
  • parent dating site in
  • internet dating research
  • Name:

    St. Paul Durham Chicago